Manganese Plate
  • Product: Manganese Plate
  • Brand: Metalloy Pipe Fitting Inc.
  • Sizes: Refer the specification
  • Condition: New
  • Rating: 4.4, based on 93 reviews
  • Price: Start from 2000 USD/Metric Ton (In Stock)
  • Get Quote Contact Us

Metalloy pipings solutions are among the pre-eminent organizations, involved in manufacturers, suppliers, stockists and exporter Manganese Plate. Available in different lengths, thicknesses and sizes, these Manganese Plate are widely demanded by various industries like food & beverage, chemical, petrochemical, pharmaceutical and cosmetics. In addition to this, we provide tailor-made solution for all our offered Manganese Plate as per customers’ requirements.

What is Manganese Plate?

Mangalloy is made by alloying steel, containing 0.8 to 1.25% carbon, with 11 to 15% manganese. Mangalloy is a unique non-magnetic steel with extreme anti-wear properties. The material is very resistant to abrasion and will achieve up to three times its surface hardness during conditions of impact, without any increase in brittleness which is usually associated with hardness.This allows mangalloy to retain its toughness. Most steels contain 0.15 to 0.8% manganese. High strength alloys often contain 1 to 1.8% manganese.At about 1.5% manganese content, the steel becomes brittle, and this trait increases until about 4 to 5% manganese content is reached. At this point, the steel will pulverize at the strike of a hammer. Further increase in the manganese content will increase both hardness and ductility. At around 10% manganese content the steel will remain in its austenite form at room temperature if cooled correctly.Both hardness and ductility reach their highest points around 12%, depending on other alloying agents.

Mangalloy has been used in the mining industry, cement mixers, rock crushers, railway switches and crossings, crawler treads for tractors and other high impact and abrasive environments. It is also used in high impact environments like inside a shot peening machine. These alloys are finding new uses as cryogenic steels, due to their high strength at very low temperatures. Mangalloy is heat treatable, but the manganese lowers the temperature at which austenite transforms into ferrite. Most grades are ready for use after annealing and then quenching from a yellow heat, with no further need of tempering, and usually have a normal Brinell hardness of around 200 HB, (roughly the same as 304 stainless steel), but, due to its unique properties, this number has very little effect on determining the abrasion and impact resistance of the metal. Another source says that the basic Brinnell hardness of manganese steel according to the original Hadfield specification is 220 but that with impact wear the surface hardness will increase to over 550.

We are an ISO 9001:2008,ISO 9001-2008, ISO 14001-2004, OHSAS 18001-2007, NSIC-CRISIL, EEPC, and QA-UKAS (ISO 9001-2008), SSI Certified company that follows total Quality Management System. and have been recognized as one of the world’s leading stockists and manufacturer of quality metals for over two decades and are committed to quick responses, unsurpassed quality, competitive pricing, reliable deliveries and an exhaustive inventory.

Specifications

Type Manganese Plate
Standard EURONORM 1.3401 – X120Mn13, DIN W1.3401, AFNOR X120Mn13, ASTM A128 Gr B2
Size 1/4", 1/2", 3/4", 1-1/4", 2"
Width 48", 60", 72", 96"
Thickness 3mm-600mm
Length 120", 144", 240"
Delivery time up to the order quantity
Order Accept custom order
Quality Assurance

They are visually examined for conformity to ASTM, ASME, MSS, DIN, EN, and JIS codes and standards. Upon request, official certified Inspection Agencies can be called in to witness the material reports, dimensions and quality conformity of products.

Marking & Packing

Products are packaged to ensure that there is no damage during transit. In case of exports, standard export packaging is done in wooden cases.On special requests we can also, make custom marking on our products.

Test Certificates Manufacturer Test Certificate / Laboratory Test Certificate from Govt. Approved Lab. / Under Third Party Inspection with Excise Gate Pass to available benefit.

 

Chemical Analysis Typical values (% weight)

C
Si
Mn
S
P

1.13

0.40

13

0.003

≤0.20

 

Mechanical Properties

Hardness
HB
Yield Strength
MPa
UTS
MPa
El%

KCV 20°C
(68°F) - J
Typical
Values
220 380
(55 KSI)
940
(136 KSI)
40 ≥ 112 J
(≥ 83 ft.lbs)
Guaranteed
Values*
180/245 350
(51 KSI)
800
(116 KSI)
30 64 J
(47 ft.lbs)
* after water quenching 980°C (1800°F)

 

Physical Properties

Density * Expansion Coeff.
0-600°C
Specific
Heat
Electrical *
Resistivity
Thermal *
Conductivity
Magnetic *
Permability
Metric

US
7.88 10 ⁻⁶ °C ⁻¹
21.5

10 ⁻⁶°F ⁻¹
11.9
J/Metric Kg. °C
502

BTU/lb°F
.12
μΩ.m
75

μΩ.m
75
W/m. °C
13

BTU/hr.ft°F
7.3
≈1.002

Share this Post

Reviews (93)

  • Erin

    Nice products and service

    September 27, 2018, 4:54 am
  • Nadine

    Thanks

    September 15, 2018, 6:25 am
  • Sally

    Best service

    August 23, 2018, 5:23 pm
  • Yumi

    August 21, 2018, 5:25 am
  • Yumi

    Best service

    June 5, 2018, 3:54 am
  • Juan

    May 11, 2018, 9:41 am
  • Rie

    Best service

    April 20, 2018, 6:14 am
  • Grace

    April 8, 2018, 3:10 pm
  • Fay

    April 5, 2018, 10:11 pm
  • Florence

    loved the service

    March 30, 2018, 6:16 pm
  • Nicole

    Got delivered excelent quality Manganese Plate

    February 6, 2018, 4:09 pm
  • Josephine

    November 18, 2017, 12:37 am
  • Claudette

    October 16, 2017, 4:26 pm
  • Vicky

    September 29, 2017, 6:48 am
  • Rie

    September 27, 2017, 1:31 pm
  • Peter

    August 19, 2017, 3:55 am
  • Anonymous User

    August 13, 2017, 9:48 am
  • Philippe

    best in the pipe industry

    July 31, 2017, 5:35 am
  • Miyuki

    July 21, 2017, 3:02 am
  • Anonymous User

    May 25, 2017, 7:34 am
  • Dean

    Thanks

    February 12, 2017, 7:31 am
  • Anonymous User

    Best dealer

    February 5, 2017, 4:09 pm
  • Anonymous User

    January 23, 2017, 9:54 pm
  • Philippe

    January 12, 2017, 2:56 pm
  • Virginie

    January 11, 2017, 11:53 pm
  • Yumi

    January 11, 2017, 1:40 pm
  • Anonymous User

    November 10, 2016, 5:55 pm
  • Peter

    November 6, 2016, 9:44 pm
  • Anonymous User

    loved the service

    September 18, 2016, 7:21 am
  • Tammy

    August 28, 2016, 2:23 am
  • Ayumi

    July 13, 2016, 11:23 am
  • Josephine

    Best dealer

    July 5, 2016, 10:05 am
  • Anonymous User

    June 9, 2016, 6:38 am
  • Paula

    June 4, 2016, 5:44 am
  • Charley

    Best service

    May 18, 2016, 2:27 am
  • Youko

    April 3, 2016, 4:25 pm
  • Anonymous User

    February 18, 2016, 12:40 pm
  • Danielle

    January 30, 2016, 10:50 pm
  • Stanford Fittings

    Got delivered excelent quality Manganese Plate

    January 21, 2016, 2:18 am
  • Odette

    January 6, 2016, 4:21 am
  • Nanaho

    December 22, 2015, 7:05 pm
  • Nicholas

    November 27, 2015, 3:56 pm
  • Marco

    October 22, 2015, 11:08 am
  • Kumiko

    September 21, 2015, 11:51 pm
  • Rachana Thapa

    best in the pipe industry

    September 21, 2015, 4:20 am
  • Anonymous User

    September 9, 2015, 7:39 pm
  • Patty

    September 7, 2015, 4:46 pm
  • Aki

    July 19, 2015, 11:20 pm
  • Mahesh Singh

    July 13, 2015, 12:32 am
  • Anonymous User

    June 23, 2015, 12:05 am
  • Anonymous User

    June 15, 2015, 9:41 pm
  • Anonymous User

    June 12, 2015, 3:50 am
  • Philippe

    June 11, 2015, 5:15 pm
  • Miyuki

    Got delivered excelent quality Manganese Plate

    May 25, 2015, 9:10 am
  • Dennis

    May 7, 2015, 9:12 am
  • Tony

    April 2, 2015, 12:03 pm
  • Sebastien

    March 24, 2015, 7:27 am
  • Claudette

    March 19, 2015, 12:35 pm
  • Itoe

    March 11, 2015, 7:13 pm
  • Edouard

    February 17, 2015, 1:57 pm
  • Alex

    February 10, 2015, 7:51 am
  • Anonymous User

    January 16, 2015, 8:20 am
  • Anonymous User

    January 11, 2015, 2:09 am
  • Rajat

    January 5, 2015, 4:34 pm
  • Anonymous User

    December 20, 2014, 11:00 am
  • William

    December 16, 2014, 2:35 am
  • Bonnie

    December 4, 2014, 4:44 am
  • Wilfred

    December 1, 2014, 10:37 am
  • Philippe

    November 12, 2014, 9:32 pm
  • Marco

    October 26, 2014, 12:11 pm
  • Wanda

    August 14, 2014, 1:44 am
  • Marco

    August 13, 2014, 9:26 pm
  • Michael D.

    August 9, 2014, 1:07 pm
  • Josephine

    June 26, 2014, 4:18 am
  • Anonymous User

    June 4, 2014, 5:15 am
  • Nanaho

    May 18, 2014, 1:24 am
  • Michael

    April 23, 2014, 8:33 am
  • Allison

    April 14, 2014, 11:40 am
  • Richard

    Best dealer

    April 12, 2014, 8:27 pm
  • Iris

    April 8, 2014, 3:54 pm
  • Stanford Fittings

    March 25, 2014, 3:37 pm
  • Patty

    February 20, 2014, 2:09 pm
  • Chris

    January 5, 2014, 8:06 pm
  • Jerry

    December 18, 2013, 9:07 am
  • Sally

    October 27, 2013, 12:04 pm
  • Alex

    loved the service

    October 11, 2013, 3:22 pm
  • Anonymous User

    September 19, 2013, 7:14 am
  • Nanaho

    August 7, 2013, 6:17 pm
  • Anonymous User

    Nice products and service

    August 3, 2013, 7:23 pm
  • Tanya

    July 13, 2013, 3:04 pm
  • Youko

    June 28, 2013, 5:17 am
  • Nicole

    June 8, 2013, 8:15 am
  • Wilma

    Best dealer

    February 18, 2013, 4:11 pm

Write a Review